Raychem/TE Connectivity

DR-25-1/8-0-SP Raychem/TE

Part Number : DR-25-1/8-0
 

DR-25-1/8-0-SP Tubing

The DR-25-1/8-0-SP tubing is among the widely used Diesel heat resistant tubes available in the market these days. These are efficiently used in vehicles that corrosive fuels are used. The Raychem DR-25-1/8-0-SP tubing is known to be effectively used in military vehicles as it helps protect the ground cables and harness from the potential damage that can be caused by abrasive oils and fuels.

When it comes to its physical properties, the tubing has a shrink temperature of 175®C. This effectively means that in order to get your cables or harnesses covered by the tubing you will have to raise the heat to the shrink temperature. The tubing has a longitudinal shrinkage of approximately 10%.

It is a high quality product that can be easily used as tubing between the operating temperatures of -75®C and 150®C. Being heat & fire resistant, the tubing provides sufficient protection for the important wires and cables in the vehicle.

It is a high quality product that can be easily used as tubing between the operating temperatures of -75®C and 150®C. Being heat & fire resistant, the tubing provides sufficient protection for the important wires and cables in the vehicle.

You can buy the tubing on a per foot basis and the pricing depends on the length of the tubing that you want to purchase. The longer the length of the tube, the cheaper is the price that you pay per foot.

The base price for the DR-25-1/8-0-SP tubing is $2.13 per foot.

Standard factory spool is 150FT.

Quantity Unit Selling Price
1 - 9 $ 1.74
10 - 24 $ 1.71
25 - 49 $ 1.69
50 - 99 $ 1.55
100 and up $ 1.40
Full Spool 150FT $ 167.40
Quantity Unit Selling Price
1 - 9 $ 1.74
10 - 24 $ 1.71
25 - 49 $ 1.69
50 - 99 $ 1.55
100 and up $ 1.40
Full Spool 150FT $ 167.40

DR-25-1/4-0-SP Raychem/TE

Part Number : DR-25-1/4-0
 

DR-25-1/4-0-SP Raychem/TE Tubing

Opt for top quality Raychem DR-25-1/4-0-SP tubing that can help conceal the cables and harness in vehicles from abrasion, fluid or mechanical damage that can be potentially caused. The tubing provides efficient results even when it is subjected to different types of liquids including aviation fuel, brake fuel, hydraulic fluid, lubricating oil and even water at extremely low or high temperatures.

The usual method of application of such tubing is to choose tubing which has a larger diameter than the cable or harness to be protected and then shrink it down in order to get a perfect cover. All tubing have a specified shrink temperature, which in case of DR-25-1/4-0-SP tubing is approximately 150®C.

Physical properties of these tubing allow them to operate well within a specified range of temperature. The tubing is also quite flexible which makes it easier to install even in areas where there is not a lot of space and things have to be compact. Due to all these extremely rare to find attributes, the tubing is in high demand in multiple industries. It is widely used in the racing cars as well as a lot of military vehicles where ground cables can be subjected to the extremes of fluids.

DR-25-1/4-0-SP is available for sale based on the number of feet of tubing you buy. The maximum per foot price for this type of tubing is $2.63 per foot.

Standard factory spool is 150FT.

Quantity Unit Selling Price
1 - 9 $ 2.19
10 - 24 $ 2.14
25 - 49 $ 2.03
50 - 99 $ 1.86
100 and up $ 1.67
Full Spool 150FT $ 203.67
Quantity Unit Selling Price
1 - 9 $ 2.19
10 - 24 $ 2.14
25 - 49 $ 2.03
50 - 99 $ 1.86
100 and up $ 1.67
Full Spool 150FT $ 203.67

DR-25-3/16-0-SP Raychem/TE

Part Number : DR-25-3/16-0
 

DR-25-3/16-0-SP Raychem/TE Tubing

DR-25-3/16-0-SP tubing from Raychem offer top notch results when used to safeguard cables and wires in vehicles that require a lot of power. Such tubing becomes highly essential when there is a possibility of exposure to certain types of fluids like oils & fuels used in heavy duty vehicles. With the tubing able to cover the critical parts, the vehicle can function without any disruption and also a lot of wear and tear due to excessive heat can be avoided.

Depending on the size of the component to be protected, the width of the tubing has to be selected. The DR-25-3/16-0-SP tubing is initially expanded and then the component is placed correctly before the tubing reaches a shrink temperature. While the shrink temperature for such tubing is nearly 150®C, the full recover temperature is nearly 175®C.

The tubing can withstand extremes of temperatures and hence can keep the component protected at low temperatures of -75®C as well as extremely highly temperatures of up to 150®C. Usually available in black color, the tubing is flame retardant as well. The tubing is widely applied in multiple industries including aerospace, harness protection, insulation & protection as well as military applications.

This high temperature tubing can be purchased on a per foot basis. You can get the best price when you buy in bulk.

The base price for the DR-25-3/16-0-SP tubing is $2.45 per foot.

Standard factory spool is 150FT

Quantity Unit Selling Price
1 - 9 $ 1.91
10 - 24 $ 1.87
25 - 49 $ 1.85
50 - 99 $ 1.70
100 and up $ 1.53
Full Spool 150FT $ 184.88
Quantity Unit Selling Price
1 - 9 $ 1.91
10 - 24 $ 1.87
25 - 49 $ 1.85
50 - 99 $ 1.70
100 and up $ 1.53
Full Spool 150FT $ 184.88

DR-25-3/8-0-SP Raychem /TE

Part Number : DR-25-3/8-0
 

DR-25 3/8" Tubing

If you are looking for reliable and efficient tubing, you definitely have to consider the use of DR-25 3/8" tubing. It is an ideal solution when you are looking to protect the wires and harness in your vehicle from the damage that can be caused due to the abrasive nature of fluids as well as any form of mechanical damage that could be caused. With a quality product like this, you can expect the best results even under the extremes of temperatures as the tubing is designed keeping in mind the conditions that it has to work under.

The 3/8" tubing is among the mid-level tubing options when it comes to the diameter. It can conceal cables and harness that are thinner than the given width. In order to complete the process of tubing installation, it is important that the shrink temperature is attained, which in this case is around 150®C. However, in order to get the tubing back to full recovery, it is advisable to subject it to temperatures nearing 175®C.

The tubing is usually spool packaged and is black in color. Its physical properties include high tolerance to heat and also it has the ability to keep away flames. Such tubing is usually used in vehicles wherein there are highly flammable and heat generating fuels & fluids in use.

In order to purchase DR-25 3/8" tubing, you can place your order on a per foot basis. The pricing for this kind of tubing starts from $2.53 per foot and goes lower as you increasing the length of the tubing you purchase at a time.

Standard factory spool is 150FT.

Quantity Unit Selling Price
1 - 9 $ 2.70
10 - 24 $ 2.65
25 - 49 $ 2.50
50 - 99 $ 2.25
100 and up $ 2.00
Full Spool 150FT $ 270.00
Quantity Unit Selling Price
1 - 9 $ 2.70
10 - 24 $ 2.65
25 - 49 $ 2.50
50 - 99 $ 2.25
100 and up $ 2.00
Full Spool 150FT $ 270.00

DR-25-1/2-0-SP Raychem/TE

Part Number : DR-25-1/2-0
 

DR-25-1/2-0-SP Raychem/TE Tubing

DR-25-1/2-0-SP tubing provides adequate cover for your wires and cables in your vehicle. There can be a substantial amount of damage that can be caused by the various fuels and other liquids in the engine when they run at really high/low temperatures. With the help of the tubing you can ensure that the damage that can be possibly caused is avoided to a very large extent. Many a times these fluids can cause abrasions and hence the wear and tear can also have an effect on the performance of your vehicle.

The DR-25-1/2-0-SP tubing is comparatively for the larger cables and harness. Once you have placed the portion to be protected within the tubing, you just need to ensure that you can take the tubing to the desired shrink temperature where it begins to wrap tightly around the portion to be protected. For the 1/2” tubing, the temperature to achieve the shrink and full recovery is around 175®C.

The physical properties of this Raychem tubing allow it to withstand extremely high and extremely low temperatures without much damage. Due to this resistance to heat & cold as well as its ability to hold up against flames as well, you will find the being used in a lot of industries as a method to safeguard the important cables.

This black colored and spool packages DR-25-1/2-0-SP tubing is available and can be bought on a per foot basis. The longer the tubing, lesser is the pricing per foot.

The base price for the DR-25-1/2-0-SP tubing is $3.30 per foot.

Standard factory spool is 150FT.

Quantity Unit Selling Price
1 - 9 $ 3.08
10 - 24 $ 3.03
25 - 49 $ 2.75
50 - 99 $ 2.48
100 and up $ 2.20
Full Spool 150FT $ 297.00
Quantity Unit Selling Price
1 - 9 $ 3.08
10 - 24 $ 3.03
25 - 49 $ 2.75
50 - 99 $ 2.48
100 and up $ 2.20
Full Spool 150FT $ 297.00

DR-25-3/4-0-SP Raychem/TE

Part Number : DR-25-3/4-0
 

DR-25-3/4-0-SP Raychem/TE Tubing

One of the larger tubing options available, the DR-25-3/4-0-SP tubing is ideal to keep the thicker cables & harness well protected. With a 1.22 mm wall thickness, it is an ideal solution if you are looking to keep out the damage that can be caused by the high temperature fluids in your vehicle. Raychem is one of the most trustworthy providers for tubing globally.

This elastomer has a shrink ratio of 2:1 with a single wall. In the expanded state it has a width of 12.7 mm while in the recovered state the tubing has a width of 6.4 mm. The ideal way of using the tubing is to pass the cables through it and then heat it to the shrink temperature so that the cables to be protected can be tightly wrapped. The usual temperature for the shrink of this type of tubing is about 175 degrees Celsius.

DR-25 3/4" tubing is able to provide assured protection to the various components that are critical for the vehicle at very high as well as very low temperature. This makes the tubing all the more desirable. The application of this tubing ranges from military vehicles to racing cars. A lot of vehicle designs are dependent on the correct performance of such tubing for efficient results.

The tubing is usually black in color and is available on a per foot basis.

The base price per foot, for DR-25-3/4-0-SP tubing, is $4.83.

Standard factory spool is 100FT.

Quantity Unit Selling Price
1 - 9 $ 3.78
10 - 24 $ 3.60
25 - 49 $ 3.51
50 - 99 $ 3.33
100 and up $ 3.06
100 FT Spool $ 270.00
Quantity Unit Selling Price
1 - 9 $ 3.78
10 - 24 $ 3.60
25 - 49 $ 3.51
50 - 99 $ 3.33
100 and up $ 3.06
100 FT Spool $ 270.00

DR-25-1-0-SP Raychem/TE

Part Number : DR-25-1-0
 

DR-25-1-0-SP Raychem/TE Tubing

The one-inch DR-25 tubing from Raychem is the second biggest size available. It is essentially to help keep out the ill effects of the abrasive fluids at very high temperatures. The tubing is specially designed to ensure that while the cables and harnesses can be protected, even the installation is not a big problem. DR-25-1-0-SP tubing have a great amount of flexibility which allows you to install them almost anywhere.

It has a 2:1 shrink ratio and shrinks from 25.4mm to 12.7mm when subjected to the shrink temperature of 175®C. The tubing can help keep out the possible ill effects due to liquids like diesel fuel, hydraulic fluid, aviation fuel etc. While the tubing helps against abrasion and fluids, it also helps in preventing any kind of mechanical damage to the component.

It is mostly packages as a spool and available in black color. You can find it in various military vehicles as well as motorsport and industrial application. This heat shrinkable tubing is high temperature compatible with an operational temperature range of -75 to 150®C.

DR-25-1-0-SP tubing from Raychem is a high quality product which is government and industry qualified. You can purchase the tubing on a per foot basis.

The base price for DR-25-1-0-SP tubing, is $8.28 per foot. Lower prices apply for larger orders!

Standard factory spool is 100FT.

Quantity Unit Selling Price
1 - 9 $ 5.58
10 - 24 $ 5.44
25 - 49 $ 5.30
50 - 99 $ 5.16
100 and up $ 4.46
100 FT Spool $ 385.02
Quantity Unit Selling Price
1 - 9 $ 5.58
10 - 24 $ 5.44
25 - 49 $ 5.30
50 - 99 $ 5.16
100 and up $ 4.46
100 FT Spool $ 385.02

DR-25-1-1/2- 0-SP Raychem/TE

Part Number : DR-25-1 1/2-0
 

DR-25-1-1/2-0-SP Raychem/TETubing

Raychem DR-25-1-1/2- 0-SP Tubing is definitely one of the highest selling heat shrinkable tubing available. In most vehicles, the tubing is utilized in order to reduce the damage that can be order to keep the various cables & harnesses protected from the diesel fuel, hydraulic fluids as well as water at high temperatures.

Without the thick layer of tubing, there are higher chances of abrasive, mechanical or fluid damage being caused to vital components which can then hamper the smooth functioning of the vehicle. This tubing has great flexibility and shrinks to half the size when heated to the shrink temperature. This allows the tubing to form a tight protective layer around the cables. The longitudinal shrinkage, however, is just around 10%.

This highly effective tubing works well between temperatures of -75 degrees celsius and 150 degrees celsius. The tubing is also known to be a good flame retardant which helps in reducing the chance of a fire being caught due to excessive temperatures.

The tubing is available in black color only. DR-25-1-1/2- 0-SP tubing shrinks from approximately 38.1mm to 19mm at its shrink temperature.

The base price for DR-25-1-1/2- 0-SP tubing, is $15.60 per foot. Being the thickest tubing available, it is a little costly as compared to the thinner ones but is useful covering the bigger cables and harnesses.

Standard factory spool is 50FT.

Quantity Unit Selling Price
1 - 10 $ 14.28
11 - 24 $ 13.23
25 - 49 $ 12.17
50 - 99 $ 11.11
100 and up $ 10.58
100 FT Spool $ 978.65
Quantity Unit Selling Price
1 - 10 $ 14.28
11 - 24 $ 13.23
25 - 49 $ 12.17
50 - 99 $ 11.11
100 and up $ 10.58
100 FT Spool $ 978.65

DR-25 3/32" Tubing Thinwall

Part Number : DR-25-3/32-0-TW
Quantity Unit Selling Price
1 - 10 $ 2.50
11 - 25 $ 2.25
26 - 50 $ 2.00
51 - 100 $ 1.80
101 - 149 $ 1.70
150 - 300 $ 1.50
301 and up $ 1.40
Quantity Unit Selling Price
1 - 10 $ 2.50
11 - 25 $ 2.25
26 - 50 $ 2.00
51 - 100 $ 1.80
101 - 149 $ 1.70
150 - 300 $ 1.50
301 and up $ 1.40

Non Lipped Straight Boot

Part Number : 202A111-25-0

Non Lipped Straight Boot

Part Number : 202A121-25-0

Non Lipped Straight Boot

Part Number : 202A132-25-0

Non Lipped Straight Boot

Part Number : 202A142-25-0

Non Lipped Straight Boot

Part Number : 202A153-25-0

202K111-25-0 Raychem Shrink Boot

Part Number : 202K111-25-0

 202K111-25-0 Raychem Shrink Boot

  • Fluid resistant mofified elastomer
  • Resists long term heat exposure
  • Operates in the temp range of -75°C -150° C
  • Shrink boot starts to shrink at 135°C
  • Optimal temp for installation 175° C
  • Designed to work with DR-25 tubing
  • We recommend RT125 adhesive for sealing transtions to tubing
  • Suitable heat shrink tubing would be:

202K111-25-0 Datasheet

Quantity Unit Selling Price
1 - 4 $ 9.77
5 - 9 $ 8.95
10 - 24 $ 8.75
25 - 49 $ 8.55
50 - 99 $ 8.14
100 - 249 $ 6.11
250 - 499 $ 5.29
500 and up $ 4.88
Quantity Unit Selling Price
1 - 4 $ 9.77
5 - 9 $ 8.95
10 - 24 $ 8.75
25 - 49 $ 8.55
50 - 99 $ 8.14
100 - 249 $ 6.11
250 - 499 $ 5.29
500 and up $ 4.88

Lipped Straight Boot

Part Number : 202K121-25-0

 

Lipped Straight Boot

Part Number : 202K132-25-0

Lipped Straight Boot

Part Number : 202K142-25-0

Lipped Straight Boot

Part Number : 202K153-25-0

Lipped Straight Boot

Part Number : 202K163-25-0

Lipped Straight Boot

Part Number : 202K174-25-0

Non Lipped Straight Boot

Part Number : 202A163-25-0

Non Lipped Straight Boot

Part Number : 202A174-25-0

T Boot

Part Number : 301A011-25-0

T Boot

Part Number : 301A022-25-0

T Boot

Part Number : 301A028-25-0

T Boot

Part Number : 301A034-25-0

T Boot

Part Number : 322A112-25-0

T Boot

Part Number : 322A123-25-0

T Boot

Part Number : 322A134-25-0

1/8 Adhesive Lined Tubing

Part Number : SCL-1/8-0

3/16 Adhesive Lined Tubing

Part Number : SCL-3/16-0

1/4 Adhesive Lined Tubing

Part Number : SCL-1/4-0

3/8 Adhesive Lined Tubing

Part Number : SCL-3/8-0

1/2 Adhesive Lined Tubing

Part Number : SCL-1/2-0

3/4 Adhesive Lined Tubing

Part Number : SCL-3/4-0

1" Adhesive Lined Tubing

Part Number : SCL-1-0

1/8" Clear Shrink Tubing

Part Number : RT-375-1/8

3/16" Clear Shrink Tubing

Part Number : RT-375-3/16

1/4" Clear Shrink Tubing

Part Number : RT-375-1/4

3/8" Clear Shrink Tubing

Part Number : RT-375-3/8

1/2" Clear Shrink Tubing

Part Number : RT-375-1/2

3/4" Clear Shrink Tubing

Part Number : RT-375-3/4

90° Lipped Boot

Part Number : 222D921-25-0

Straight Lipped Boot

Part Number : 202D921-25-0

Y Heat Shrink Boot

Part Number : 382A023-25-0

Y Heat Shrink Boot

Part Number : 382A012-25-0

Y Heat Shrink Boot

Part Number : 382A034-25-0

Shield Terminator With 22 Gauge Lead

Part Number : S02-09-R

Raychem/TE Solder Sleeve S02-0-9-R Shield Terminator

Shield terminators allow the technician to attach a wire to the outer braid/shield om a shielded cable.This terminator has a 6" 22 Gauge wire attached.

  • Insualtion Sleeve: Crosslinked,Modified Polyvinyl Flouride
  • Tempurature Range: -55ºC TO +150ºC
  • Pre-Installed M22759/32-22-9 Lead 6" Long
  • Meltable Sealing Ring On Both Ends

 

RECOMMENDED CABLE PREP:

  • øD2: 6.47mm .(255")
  • øD4: 5.96mm (.235")
  • øD3: 3.02mm (.130")
  • L2: 6.3-8.2mm (.250"-.325")

Mini Seal Crimp Stub Splice-Red

Part Number : D-609-03

Mini Seal Crimp Stub Splice- Blue

Part Number : D-609-04

Mini Seal Crimp Stub Splice-Yellow

Part Number : D-609-05

20 AWG x 2 Twisted Pair

Part Number : M27500/20SB2U00

M27500/20SB2U00 20X2 Wire Twisted

2 wire 20 gauge twisted pair.This twisted pair is constructed with

  • 2 X M22759/32 20 ga conductors
  • 1 twist per inch as per MIL standards
  • Conductor 1: White
  • Conductor 2: White/Blue
  • There is no braid or drain in this twisted pair

20 AWG x 2 Twisted Pair

Part Number : M27500-20ML2U00

16 AWG x 2 Shielded Cable

Part Number : M27500-16ML2T08

M27500-16ML2T08 Twisted Shielded Cable 2C

 The M27500-16ML2T08 is a 2 conductor shielded 16 ga cable. This high performance cable is comprised of a cross-linked extruded Polyalkene PVDF outer jacket with AS81044/12 Mil-Spec conductors. This cable is built to ANSI/NEMA WC 27500 REV A specifications. For detailed specifications see below. This product is RoHS compliant.

2 Conductor Twisted Pair

What is Cross-Linked Extruded Polyalkene PVDF? Click Here to learn more.
What is AS81044/12 Mil-Spec wire ? Click Here to learn more

Popular Uses:

  • Motorsport electronics
  • Airframe
  • Shipboard
  • Missle
  • Avoincs

 

Quantity Unit Selling Price
1 - 25 $ 1.21
26 - 50 $ 1.12
51 - 100 $ 1.04
101 - 250 $ 0.97
251 - 501 $ 0.87
502 - 1,000 $ 0.78
1,001 and up $ 0.63
Quantity Unit Selling Price
1 - 25 $ 1.21
26 - 50 $ 1.12
51 - 100 $ 1.04
101 - 250 $ 0.97
251 - 501 $ 0.87
502 - 1,000 $ 0.78
1,001 and up $ 0.63

16 AWG x 3 Shielded Cable

Part Number : M27500-16ML3T08

M27500-16ML3T08 Twisted Shielded Cable 3C

 The M27500-16ML3T08 is a 3 conductor shielded 16 ga cable. This high performance cable is comprised of a cross-linked extruded Polyalkene PVDF outer jacket with AS81044/12 Mil-Spec conductors. This cable is built to ANSI/NEMA WC 27500 REV A specifications. For detailed specifications see below. This product is RoHS compliant.

3 Conductor Twisted

What is Cross-Linked Extruded Polyalkene PVDF? Click Here to learn more.
What is AS81044/12 Mil-Spec wire ? Click Here to learn more

Popular Uses:

  • Motorsport electronics
  • Airframe
  • Shipboard
  • Missle
  • Avoincs

 

Quantity Unit Selling Price
1 - 25 $ 1.75
26 - 50 $ 1.61
51 - 100 $ 1.51
101 - 250 $ 1.40
251 - 500 $ 1.26
501 - 1,000 $ 1.12
1,001 and up $ 0.91
Quantity Unit Selling Price
1 - 25 $ 1.75
26 - 50 $ 1.61
51 - 100 $ 1.51
101 - 250 $ 1.40
251 - 500 $ 1.26
501 - 1,000 $ 1.12
1,001 and up $ 0.91

Solder Sleeve Shield Termination

Part Number : S01-04-R

Solder Sleeve Shield Termination

Part Number : S01-02-R

24 AWG x 2 Shielded Cable

Part Number : M27500/24SB2T23

M27500-24SB2T23 Twisted Shielded Cable 2C

 The M27500-24SB2T23 is a 2 conductor shielded 24 ga cable. This high performance cable is comprised of a cross-linked extruded ETFE outer jacket with MS22759/32 Mil-Spec conductors. This cable is built to ANSI/NEMA WC 27500 REV A specifications. For detailed specifications see below. This product is RoHS compliant.

2 Conductor Twisted Pair

What is Cross-Linked Extruded ETFE? Click Here to learn more
What is M22759/32 Mil-Spec wire? Click Here to learn more

Popular Uses:

  • Motorsport electronics
  • Airframe
  • Shipboard
  • Missle
  • Avoincs

 

Quantity Unit Selling Price
1 - 50 $ 0.54
51 - 100 $ 0.50
101 - 250 $ 0.48
251 - 500 $ 0.46
501 - 1,000 $ 0.44
1,001 - 2,500 $ 0.43
2,501 - 5,000 $ 0.40
5,001 and up $ 0.60
Quantity Unit Selling Price
1 - 50 $ 0.54
51 - 100 $ 0.50
101 - 250 $ 0.48
251 - 500 $ 0.46
501 - 1,000 $ 0.44
1,001 - 2,500 $ 0.43
2,501 - 5,000 $ 0.40
5,001 and up $ 0.60

26 AWG x 2 Shielded Cable

Part Number : M27500/26SB2T23

M27500-26SB2T23 Twisted Shielded Cable 2C

 The M27500-26SB2T23 is a 2 conductor shielded 26 ga cable. This high performance cable is comprised of a cross-linked extruded ETFE outer jacket with MS22759/32 Mil-Spec conductors. This cable is built to ANSI/NEMA WC 27500 REV A specifications. For detailed specifications see below. This product is RoHS compliant.

2 Conductor Twisted Pair

What is Cross-Linked Extruded ETFE? Click Here to learn more
What is M22759/32 Mil-Spec wire? Click Here to learn more

Popular Uses:

  • Motorsport electronics
  • Airframe
  • Shipboard
  • Missle
  • Avoincs

 

Quantity Unit Selling Price
1 - 50 $ 1.92
51 - 100 $ 1.80
101 - 250 $ 1.68
251 - 500 $ 1.56
501 - 1,000 $ 0.96
1,001 - 2,500 $ 0.84
2,501 - 5,000 $ 0.78
5,001 and up $ 0.60
Quantity Unit Selling Price
1 - 50 $ 1.92
51 - 100 $ 1.80
101 - 250 $ 1.68
251 - 500 $ 1.56
501 - 1,000 $ 0.96
1,001 - 2,500 $ 0.84
2,501 - 5,000 $ 0.78
5,001 and up $ 0.60

HFT5000-12/6-0-SP

Part Number : HFT5000-12/6-0-SP

HFT5000-12/6-0-SP Heat Shrinkable Fabric

Product Dimensions:
  • I.D. As Supplied 12mm (.47")
  • I.D. After Recovery 6mm (.24")

 

  • Highly flexible woven fabric tubing
  • Polyethylene/polyester construction for excellent abrasion resistance
  • 2:1 shrink ratio for easy installation onto different substrate diameters and sizes
  • Highly flexible woven fabric construction for easy, compliant installation onto awkward substrates such as bent hoses, wire looms.
  • Easily cut with standard industrial cutting equipment
  • Resistant to harsh environments

 

Installation:

  • Minimum shrink temperature: 80°C [176°F]
  • Minimum full recovery temperature: 110°C [230°F]

Operating Temp Range:

  • 3000 hours: -40°C to 125°C [-40°F to 257°F]
  • 1000 hours: -40°C to 150°C [-40°F to 302°F]
Quantity Unit Selling Price
1 - 10 $ 1.38
11 - 24 $ 1.32
25 - 49 $ 1.05
50 - 100 $ 0.90
101 - 200 $ 0.81
201 and up $ 0.74
Quantity Unit Selling Price
1 - 10 $ 1.38
11 - 24 $ 1.32
25 - 49 $ 1.05
50 - 100 $ 0.90
101 - 200 $ 0.81
201 and up $ 0.74

Relay Base Terminal 12-10 Ga 1/4 Push-On

Part Number : 180351-2

TERMINAL FOR RELAY CONNECTOR 1/4" PUSH-ON, 12-10 GA

Genuine TE Connectivity 1/4" uninsulated push on terminals for use in our mini and micro relay housings.

  • 12-10 Gauge
  • Tin Plated
  • 1/4" Push on
  • FASTIN-FASTON Series
Quantity Unit Selling Price
1 - 49 $ 0.16
50 - 999 $ 0.13
1,000 - 4,999 $ 0.11
5,000 and up $ 0.09
Quantity Unit Selling Price
1 - 49 $ 0.16
50 - 999 $ 0.13
1,000 - 4,999 $ 0.11
5,000 and up $ 0.09

HFT5000-20/10-0-SP

Part Number : HFT5000-20/10-0-SP

HFT5000-20/10-0-SP Heat Shrinkable Fabric

Product Dimensions:
  • I.D. As Supplied 20mm (.79")
  • I.D. After Recovery 10mm (.39")

 

  • Highly flexible woven fabric tubing
  • Polyethylene/polyester construction for excellent abrasion resistance
  • 2:1 shrink ratio for easy installation onto different substrate diameters and sizes
  • Highly flexible woven fabric construction for easy, compliant installation onto awkward substrates such as bent hoses, wire looms.
  • Easily cut with standard industrial cutting equipment
  • Resistant to harsh environments

 

Installation:

  • Minimum shrink temperature: 80°C [176°F]
  • Minimum full recovery temperature: 110°C [230°F]

Operating Temp Range:

  • 3000 hours: -40°C to 125°C [-40°F to 257°F]
  • 1000 hours: -40°C to 150°C [-40°F to 302°F]
Quantity Unit Selling Price
1 - 10 $ 1.38
11 - 24 $ 1.32
25 - 49 $ 1.05
50 - 100 $ 0.90
101 - 200 $ 0.81
201 and up $ 0.74
Quantity Unit Selling Price
1 - 10 $ 1.38
11 - 24 $ 1.32
25 - 49 $ 1.05
50 - 100 $ 0.90
101 - 200 $ 0.81
201 and up $ 0.74

HFT5000-30/15-0-SP

Part Number : HFT5000-30/15-0-SP

HFT5000-30/15-0-SP Heat Shrinkable Fabric

Product Dimensions:
  • I.D. As Supplied 30mm (1.18")
  • I.D. After Recovery 15mm (.59")

 

  • Highly flexible woven fabric tubing
  • Polyethylene/polyester construction for excellent abrasion resistance
  • 2:1 shrink ratio for easy installation onto different substrate diameters and sizes
  • Highly flexible woven fabric construction for easy, compliant installation onto awkward substrates such as bent hoses, wire looms.
  • Easily cut with standard industrial cutting equipment
  • Resistant to harsh environments

 

Installation:

  • Minimum shrink temperature: 80°C [176°F]
  • Minimum full recovery temperature: 110°C [230°F]

Operating Temp Range:

  • 3000 hours: -40°C to 125°C [-40°F to 257°F]
  • 1000 hours: -40°C to 150°C [-40°F to 302°F]
Quantity Unit Selling Price
1 - 10 $ 1.96
11 - 24 $ 1.87
25 - 49 $ 1.49
50 - 100 $ 1.28
101 - 200 $ 1.15
201 and up $ 1.05
Quantity Unit Selling Price
1 - 10 $ 1.96
11 - 24 $ 1.87
25 - 49 $ 1.49
50 - 100 $ 1.28
101 - 200 $ 1.15
201 and up $ 1.05

Relay Base Terminal 18-14 Ga 1/4 Push-On

Part Number : 42100-2

TERMINAL FOR RELAY CONNECTOR 1/4" PUSH-ON, 18-14 GA

Genuine TE Connectivity 1/4" uninsulated push on terminals for use in our mini and micro relay housings.

  • 18-14 Gauge
  • Tin Plated
  • 1/4" Push on
  • FASTIN-FASTON Series
Quantity Unit Selling Price
1 - 49 $ 0.15
50 - 999 $ 0.12
1,000 - 4,999 $ 0.10
5,000 and up $ 0.09
Quantity Unit Selling Price
1 - 49 $ 0.15
50 - 999 $ 0.12
1,000 - 4,999 $ 0.10
5,000 and up $ 0.09

HFT5000-40/20-0-SP

Part Number : HFT5000-40/20-0-SP

HFT5000-40/20-0-SP Heat Shrinkable Fabric

Product Dimensions:
  • I.D. As Supplied 40mm (1.57")
  • I.D. After Recovery 20mm (.79")

 

  • Highly flexible woven fabric tubing
  • Polyethylene/polyester construction for excellent abrasion resistance
  • 2:1 shrink ratio for easy installation onto different substrate diameters and sizes
  • Highly flexible woven fabric construction for easy, compliant installation onto awkward substrates such as bent hoses, wire looms.
  • Easily cut with standard industrial cutting equipment
  • Resistant to harsh environments

 

Installation:

  • Minimum shrink temperature: 80°C [176°F]
  • Minimum full recovery temperature: 110°C [230°F]

Operating Temp Range:

  • 3000 hours: -40°C to 125°C [-40°F to 257°F]
  • 1000 hours: -40°C to 150°C [-40°F to 302°F]
Quantity Unit Selling Price
1 - 10 $ 1.84
11 - 24 $ 1.76
25 - 49 $ 1.40
50 - 100 $ 1.20
101 - 200 $ 1.08
201 and up $ 0.98
Quantity Unit Selling Price
1 - 10 $ 1.84
11 - 24 $ 1.76
25 - 49 $ 1.40
50 - 100 $ 1.20
101 - 200 $ 1.08
201 and up $ 0.98

HFT5000-6/3-0-SP

Part Number : HFT5000-6/3-0-SP

HFT5000-6/3-0-SP Heat Shrinkable Fabric

Product Dimensions:
  • I.D. As Supplied 6mm (.23")
  • I.D. After Recovery 3mm (.11")

 

  • Highly flexible woven fabric tubing
  • Polyethylene/polyester construction for excellent abrasion resistance
  • 2:1 shrink ratio for easy installation onto different substrate diameters and sizes
  • Highly flexible woven fabric construction for easy, compliant installation onto awkward substrates such as bent hoses, wire looms.
  • Easily cut with standard industrial cutting equipment
  • Resistant to harsh environments

 

Installation:

  • Minimum shrink temperature: 80°C [176°F]
  • Minimum full recovery temperature: 110°C [230°F]

Operating Temp Range:

  • 3000 hours: -40°C to 125°C [-40°F to 257°F]
  • 1000 hours: -40°C to 150°C [-40°F to 302°F]
Quantity Unit Selling Price
1 - 10 $ 1.27
11 - 24 $ 1.21
25 - 49 $ 0.96
50 - 100 $ 0.83
101 - 200 $ 0.74
201 and up $ 0.68
Quantity Unit Selling Price
1 - 10 $ 1.27
11 - 24 $ 1.21
25 - 49 $ 0.96
50 - 100 $ 0.83
101 - 200 $ 0.74
201 and up $ 0.68

224W511-25-0 Lipped Boot

Part Number : 224W511-25-0

223W601-25-0 Lipped Boot

Part Number : 223W601-25-0

Miniature 90° Lipped Boot

Part Number : 223W301-25-0

202K185-25-0 Lipped Straight Boot

Part Number : 202K185-25-0

22 AWG x 3 Shielded Cable Red Striped Jacket

Part Number : M27500-22SB3T23-2

M27500-22SB3T23 Twisted Shielded Cable 3C

 The M27500-22SB3T23 is a 3 conductor shielded 22 ga cable. This high performance cable is comprised of a cross-linked extruded ETFE outer jacket with MS22759/32 Mil-Spec conductors. This cable is built to ANSI/NEMA WC 27500 REV A specifications. For detailed specifications see below. This product is RoHS compliant.

3 Conductor Twisted

What is Cross-Linked Extruded ETFE? Click Here to learn more
What is M22759/32 Mil-Spec wire? Click Here to learn more

Popular Uses:

  • Motorsport electronics
  • Airframe
  • Shipboard
  • Missle
  • Avoincs

 

Quantity Unit Selling Price
1 - 25 $ 0.75
26 - 50 $ 0.69
51 - 100 $ 0.63
101 - 250 $ 0.60
251 - 500 $ 0.54
501 - 1,000 $ 0.48
1,001 and up $ 0.39
Quantity Unit Selling Price
1 - 25 $ 0.75
26 - 50 $ 0.69
51 - 100 $ 0.63
101 - 250 $ 0.60
251 - 500 $ 0.54
501 - 1,000 $ 0.48
1,001 and up $ 0.39

Map Sensor Shrink Boot

Part Number : 214A511-25-0

20 AWG x 6 Shielded Cable

Part Number : M27500/20SB6T23

M27500-20SB6T23 Twisted Shielded Cable 6C

 The M27500-20SB6T23 is a 6 conductor shielded 20 ga cable. This high performance cable is comprised of a cross-linked extruded ETFE outer jacket with MS22759/32 Mil-Spec conductors. This cable is built to ANSI/NEMA WC 27500 REV A specifications. For detailed specifications see below. This product is RoHS compliant.

6 Conductor Twisted

What is Cross-Linked Extruded ETFE? Click Here to learn more
What is M22759/32 Mil-Spec wire? Click Here to learn more

Popular Uses:

  • Motorsport electronics
  • Airframe
  • Shipboard
  • Missle
  • Avoincs

 

Quantity Unit Selling Price
1 - 25 $ 1.72
26 - 50 $ 1.63
51 - 100 $ 1.55
101 - 250 $ 1.46
251 - 500 $ 1.42
501 - 1,000 $ 1.38
1,001 and up $ 1.29
Quantity Unit Selling Price
1 - 25 $ 1.72
26 - 50 $ 1.63
51 - 100 $ 1.55
101 - 250 $ 1.46
251 - 500 $ 1.42
501 - 1,000 $ 1.38
1,001 and up $ 1.29

18 AWG x 3 Shielded Cable

Part Number : M27500/18SB3T23

M27500-18SB3T23 Twisted Shielded Cable 3C

 The M27500-18SB3T23 is a 3 conductor shielded 18 ga cable. This high performance cable is comprised of a cross-linked extruded ETFE outer jacket with MS22759/32 Mil-Spec conductors. This cable is built to ANSI/NEMA WC 27500 REV A specifications. For detailed specifications see below. This product is RoHS compliant.

 3 Conductor Twisted

What is Cross-Linked Extruded ETFE? Click Here to learn more
What is M22759/32 Mil-Spec wire? Cick Here to learn more

Popular Uses:

  • Motorsport electronics
  • Airframe
  • Shipboard
  • Missle
  • Avoincs

 

Quantity Unit Selling Price
1 - 25 $ 1.55
26 - 50 $ 1.48
51 - 100 $ 1.38
101 - 250 $ 1.31
251 - 500 $ 1.24
501 - 1,000 $ 1.10
1,001 and up $ 0.90
Quantity Unit Selling Price
1 - 25 $ 1.55
26 - 50 $ 1.48
51 - 100 $ 1.38
101 - 250 $ 1.31
251 - 500 $ 1.24
501 - 1,000 $ 1.10
1,001 and up $ 0.90

20 AWG x 2 Shielded Cable

Part Number : M27500/20SB2T23

M27500-20SB2T23 Twisted Shielded Cable 2C

 The M27500-20SB2T23 is a 2 conductor shielded 20 ga cable. This high performance cable is comprised of a cross-linked extruded ETFE outer jacket with MS22759/32 Mil-Spec conductors. This cable is built to ANSI/NEMA WC 27500 REV A specifications. For detailed specifications see below. This product is RoHS compliant.

2 Conductor Twisted Pair

What is Cross-Linked Extruded ETFE? Click Here to learn more
What is M22759/32 Mil-Spec wire? Click Here to learn more

Popular Uses:

  • Motorsport electronics
  • Airframe
  • Shipboard
  • Missle
  • Avoincs

 

Quantity Unit Selling Price
1 - 25 $ 0.57
26 - 50 $ 0.52
51 - 100 $ 0.48
101 - 250 $ 0.45
251 - 500 $ 0.41
501 - 1,000 $ 0.36
1,001 and up $ 0.30
Quantity Unit Selling Price
1 - 25 $ 0.57
26 - 50 $ 0.52
51 - 100 $ 0.48
101 - 250 $ 0.45
251 - 500 $ 0.41
501 - 1,000 $ 0.36
1,001 and up $ 0.30

34 Way Plug Connector Housing Key 2

Part Number : 4-1437290-1

90° Lipped Boot

Part Number : 222K121-25-0

90° Lipped Boot

Part Number : 222K132-25-0

90° Lipped Boot

Part Number : 222K142-25-0